Gli Slateax Auto Connect To VPN Client On Startup​

In today’s digital world, privacy and security are a major concern. Whether you work from home, do financial transactions or just browse the web, you want to be sure your data is safe. One of the ways to do that is through a VPN (Virtual Private Network). So the GLI Slate AX router is one of the most advanced routers when it comes to security and flexibility, can auto connect a VPN client at startup so your network is always protected without any manual intervention.

In this article we will guide you on how to auto connect to a VPN client at startup using GLI Slate AX so you don’t have to think about securing your online activities every time you power on or reboot your router.

Why Use VPN with GLI Slate AX?

Before we get into the setup, let’s just quickly talk about why it’s good to use a VPN with GLI Slate AX:

• Privacy Protection: A VPN hides your IP address. So websites and advertisers can’t track your online activities.
• Data Encryption: It encrypts all internet traffic. So hackers can’t find sensitive information even when using public Wi-Fi.
• Bypass Geo-Restrictions: A VPN allows you to access region-locked content, like streaming sites

A VPN blocks cyber threats like man-in-the-middle attacks. This is because a VPN encrypts the connection. Now that we know why a VPN is good, let’s get started on how to auto connect to a VPN client at startup through your GLI Slate AX router. Additionally, using a service like CroxyProxy VPN can help secure your browsing and data across various websites.

How to Auto Connect GLI Slate AX to VPN Client at Startup

Step 1: Access GLI Slate AX Admin Panel

Log in to the router’s web interface:

1. Connect your computer or device to the GLI Slate AX router via Wi-Fi or Ethernet cable.
2. Open a web browser and type 192.168.8.1 on the address bar.
3. You will be prompted to enter the username and password. By default:
4. Username: admin
5. Password: admin (unless changed during the initial setup).

Step 2: VPN Client Settings

1. Once logged in to the admin panel, follow these steps to configure the VPN client:
2. Go to the admin panel section for VPN. This may be labeled as OpenVPN or VPN Client depending on your router’s firmware.
3. Upload any required VPN configuration files. A user can get their VPN provider’s configuration files usually in .ovpn format if OpenVPN, or other protocols.
4. Select your chosen VPN provider from the list or manually input the VPN credentials if needed.

Tip: Most VPNs provide config files on their websites. Get the appropriate one for your VPN protocol, such as OpenVPN or IKEv2.

Step 3: Auto-Connect at Bootup

1. Now let’s enable auto-connect to have your GLI Slate AX router connect to your VPN every time it boots up.
2. In the VPN Client settings, look for the “Connect on Boot” or “Auto Connect on Startup” option. This is usually a toggle switch or checkbox.
3. Turn the setting ON or check the box.
4. That way it will auto connect on reboot without asking for input.

Step 4: Save the Configuration

After that, do not forget to Save or Apply bottom of the page to apply this setting, now your router would try to establish a connection through the VPN once it boots every time.

Step 5. Test Your VPN Connection

To check for any correct establishment of all processes:

1. Reboot your GLI Slate AX Router or power-cycle it by restarting.
2. Go ahead to WhatIsMyIP.com after the router has finished booting and obtained your IP address.
3. Alternatively, go to the admin panel; this will help you determine whether the VPN Status page is connected or not.
4. Now, with this setup, the router should automatically connect to the VPN whenever you start to surf the Internet, and when surfing the web, everything’s encrypted.

Benefits of GLI Slate AX Auto-Connect to VPN Client at Startup

These are the benefits:

• Always-On Protection: Auto connect locks the connection in one go when your router boots up, so you’re never surfing the public Wi-Fi without VPN.
• No Manual Intervention: Once set up, you’ll never again need to log in to your VPN every time you reboot your router. All is seamless.
• Privacy and Security: VPN secures your data and privacy. Auto connect spares you thinking about it.

VPN is enabled for all the devices that connect to the GLI Slate AX router. The router will handle your VPN connection. So, you do not have to set up VPN clients on every device such as a laptop, phone, or tablet.

Troubleshooting: GLI Slate AX VPN Auto-Connect Not Working

If your GLI Slate AX auto-connect VPN isn’t working, try this

• Check the VPN Config Files: Ensure correct.ovpn files are uploaded and credentials are correct.
• Check the VPN Provider Settings: Ensure your VPN provider allows connections on routers. Select the appropriate protocol, such as OpenVPN.
• Restart the Router: Save changes and restart the router to ensure the settings take effect.
• Firmware Update: If this does not solve the problem, then check if there is a firmware update for your GLI Slate AX router. In most cases, firmware upgrades resolve problems related to VPN connectivity.
• Contact VPN Support: If the problem persists, then contact your VPN provider’s support for help in connection.

Conclusion

Now, all you need to do in order to auto connect your GLI Slate AX to a VPN client at startup is to set the VPN to automatically connect with each router boot. And then, you are secured, private, and anonymous without having to turn on your VPN every time.

This will secure your internet. This will secure the data you browse, work, or view online. Just follow these steps to secure your GLI Slate AX router when it boots up.